You are here


Ares 12 is an industrial  unit  for  remote  monitoring  and  alarming  over  GSM for locations without LAN access. Includes battery backup. Connect up to 14 external sensors  and  2 dry contact   detectors.
Use the SensDesk portal to configure the Ares, send alarms or display graphs.
Ares monitors the readings of connected sensors. When a value reaches the alarm threshold, the device sends an e-mail or a text message (SMS), or dials specified  numbers.
Ares products support FOTA (Firmware Over The Air) for remote firmware up- dates.

  • Connect up to 14 sensors or a relay output extender unit over the 1-Wire/1Wire UNI bus (RJ11) and up to 2 dry contact inputs for external detectors.
  • Data can be sent in e-mail attachments or downloaded via USB. Display the data using the SensDesk portal, its iOS or Android mobile version, or third-party apps (Nagios etc.).
  • The device can be configured remotely at the “AresConf” tab in the SensDesk portal. Remote firmware upload (FOTA) capability makes Ares devices ideal for large-scale deployments.
  • Alarms are notified by calling and texting up to 5 numbers, e-mailing up to 5 addresses, or via the SensDesk portal.
  • Ares 12 includes an internal battery that provides back-up power for up to 24 hours.
  • The “Tset” start set includes a temperature sensor with a cable that can be extended to up to 60 m
  • Ares 12 can be mounted to a wall or a DIN rail.

Horizontal menu