You are here

Products

Products map

  • Version with Power over Ethernet Available
    Version with support of 48V Power

    Damocles2 1208

    Damocles2 1208 provides 12 digital dry contact inputs (DI). All digital inputs feature S0 pulse counters with a memory to connect water, gas, electricity or other meters. Damocles2 1208 controls 8 digital open collector outputs (DO). ​ A...
  • Damocles2 2404

    Damocles2 2404 provides 24 digital inputs (DI) for dry contact detectors. All digital inputs feature S0 pulse counters with a memory to connect water, gas, electricity or other meters. Damocles2 2404 controls 4 digital relay outputs (DO)...
  • Version with Power over Ethernet Available
    Version with support of 48V Power

    Damocles2 MINI

    Damocles2 MINI provides 4 digital dry contact inputs . All digital inputs feature S0 pulse counters with a memory to connect water, gas, electricity or other meters. Damocles2 MINI controls 2 digital relay outputs (DO). A built-in web...
  • HWg-Ares 10

    Ares 10 is a cost-effective GSM thermometer for remote monitoring and alerting over GSM for locations without LAN access. Connect up to 3 external sensors and 2 dry contact detectors . Use the SensDesk portal to configure the Ares, send...
  • HWg-Ares 12

    Ares 12 is an industrial unit for remote monitoring and alarming over GSM for locations without LAN access. Includes battery backup. Connect up to 14 external sensors and 2 dry contact detectors . Use the SensDesk portal to configure the...
  • HWg-PWR3/12/25

    The HWg-PWR3/12/25 is a smart Ethernet gateway which captures data from up to 3 / 12 / 25 external meters on the M-Bus and connects the data to IP. With external M-Bus (EN 13757) meters it can be used for remote monitoring/metering of...
  • HWg-SMS-GW3

    HWg-SMS-GW3 is a SMS gateway for sending text message alarms over a LAN. Send SMS alarms from other HW group products and software through a single gateway and a single SIM. No software needed, works over a LAN at the Box-2-Box level.
  • Version with support of HWg-PUSH protocol available
    Version with Power over Ethernet Available

    HWg-STE

    HWg-STE can connect up to two sensors via 1-Wire. A built-in web server is used for configuring. The device can be monitored remotely over the internet using the free SensDesk portal in combination with the SensDesk Mobile application. It...
  • Version with Power over Ethernet Available

    HWg-STE plus

    HWg-STE can connect up to two sensors via 1-Wire and up to two detectors via digital inputs for dry contacts. A built-in web server is used for configuring. The device can be monitored remotely over the internet using the free SensDesk...
  • Version with Power over Ethernet Available

    HWg-WLD

    HWg-WLD is a water leak detector connected to the Ethernet . The sensing cable detects as little as a few drops of a liquid, and can be also used to detect condensation . Whenever a liquid is detected, the device sends an e-mail or a SNMP...
  • Version with Power over Ethernet Available
    Version with support of 48V Power

    Poseidon2 3266

    Poseidon2 3266 supports up to 8 sensors connected over 1-Wire UNI / 1-Wire and up to 4 detectors connected to digital inputs . A built-in web server is used for configuring. The device can be monitored remotely over the internet using the...
  • Version with Power over Ethernet Available
    Version with support of 48V Power

    Poseidon2 3268

    Poseidon2 3268 supports up to 8 sensors connected over 1-Wire UNI / 1-Wire and up to 4 detectors connected to digital inputs . Poseidon2 3268 can control 2 digital NO/NC relay outputs , as well as up to 8 virtual digital outputs (VDO) at...
  • Version with Power over Ethernet Available

    Poseidon2 3468

    Poseidon2 3468 supports up to 8 sensors connected over 1-Wire UNI / 1-Wire and up to 4 detectors connected to digital inputs . Poseidon2 3468 can control 2 digital 230 V / 16 A relay outputs , as well as up to 8 virtual digital outputs (...
  • Version with Power over Ethernet Available
    Version with support of 48V Power

    Poseidon2 4002

    Poseidon2 4002 can connect up to 42 sensors (16 via 1-Wire UNI/1-Wire + 26 via RS-485), provides 12 digital dry contact inputs (DI), 8 virtual digital outputs and allows control of 4 relay outputs (NO/NC). A built-in web server is used for...
  • STE2

    STE2 can connect up to three sensors via 1-Wire and up to two detectors via digital inputs for dry contacts. A built-in web server is used for configuring. The device can be monitored remotely over the internet using the free SensDesk...
  • Damocles 1208

    Damocles 1208 is a device with 12 remote inputs and 8 outputs over Ethernet with Web interface. M2M communication for connection to SNMP and SCADA systems. Pulse counters on digital inputs. E-mail and SNMP trap notifications of input state...
  • Damocles 2404i

    Damocles 2404i features 24 dry contact inputs and 4 relays controlled over an IP network (Ethernet). Includes a built-in web server, output control and alarm alerts (e-mail and SNMP trap). Outputs can be controlled manually in the web...
  • Version with support of 48V Power

    Damocles MINI

    Damocles MINI is Web-relay with 4 digital inputs and control 2 NO/NC relay outputs over the Web and M2M (SNMP, XML, Modbus/TCP). Dry contact event email or SNMP Trap alert.
  • HWg-Ares14

    HWg-Ares14 is a remote environment monitoring solution that can be used at any place with GSM coverage. Contains a battery for several hours of backup. Alerts to power failures by email or SMS (up to 5 phone numbers). Data can be read into...
  • Poseidon 2250

    Poseidon 2250 logs the values from up to 40 probes (RS-485, dry contacts, temperature, voltage, and more). Data are stored in a flash memory. The device enables monitoring over IP (Web, SNMP, Modbus/TCP) and sends alerts to values out of...
  • Version with support of 48V Power

    Poseidon 3266

    Temperature / humidity measurement and monitoring of 4 dry contacts over a LAN (Web, SNMP, E-mail). A MS Excel reporting software with is graphs included for free.
  • Version with support of 48V Power

    Poseidon 3268

    Ethernet temperature / humidity monitoring with 2 relay outputs and 4 dry contact inputs (Web, SNMP, and E-mail). Output relays can be controlled over the Web.
  • Poseidon 3468

    Web enabled thermostat with temperature/humidity measurement, four dry contact inputs and two 110/230V relay outputs. Industrial version, supports SNMP and E-mail, DIN rail mount.
  • Version with Power over Ethernet Available
    Version with support of 48V Power

    Poseidon 4002

    Poseidon 4002 is a 19" 1U rack mount system for datacenter temperature and environment monitoring. The Poseidon solution monitors racks and computer rooms (temperature, humidity, electricity supply, access to the room, detectors). Alerting...
  • Version with Power over Ethernet Available
    Version with support of 48V Power

    I/O Controller 2

    I/O Controller 2 connects a full RS-232(485) serial port and digital I/O to the Ethernet. Configuration is Web-based. The serial port can be used as a terminal server (virtual serial port). Digital inputs and outputs can be controlled over...
  • IP Relay HWg-ER02b

    Ethernet relay, DIN rail, Web interface. Features 2x DI (dry contact input), full RS-232/485 serial port, and 2x DO (relay output, 230V/16A). Controlled over the web or Modbus/TCP. Two IP relays connected back-to-back can extend (“tunnel...
  • IP WatchDog2 Industrial

    Detects outages or unresponsiveness of LAN devices. Monitors device availability over IP (PING/WEB) or serial line (RS-232). Upon outage, restarts the device without human intervention. Up to 10 devices can be monitored.
  • IP WatchDog2 Lite

    Monitors the availability and automatically restarts one or two LAN devices. Detects unresponsive devices (router, IP camera, etc.) by monitoring PING replies or web page accessibility.
  • Version with Power over Ethernet Available
    Version with support of 48V Power

    PortBox2

    PortBox2 is a RS-232 and RS485 full serial port to Ethernet converter. The remote serial port can be accessed in Windows as a Virtual Serial Port. Web-based configuration, full RS-232 (9 wires), 9th bit support (virtual parity).
  • IP Relay HWg-ER02a

    The IP Relay ER02a is a RS-232 / RS-485 serial line converter with two 230V-rated SPDT relays.
  • HWg-SH4

    Access system HWg-SH4, together with central surveillance system HWg-DCD, is designed for access control in datacentres, technological rooms, commercial spaces, apartment houses and offices.
  • HWg-SH4e

    HWg-SH4e is subordinated to HWg-SH4. HWg-SH4e units contain two independent channels (modules) for door control.
  • HWg-SH4s

    HWg-SH4s is subordinated to HWg-SH4. HWg-SH4e units contain one channel (module) for door control.
  • HWg-SH2: IP-based cabinet access system for two swinghandles

    Online cabinet Security Door Control (SDC) with Web & SNMP interface. HWg-SH2 can control front & rear doors of one cabinet. Swinghandle lock access system is controller over IP using documented M2M protocols. With the original HW...
  • HWg-SH3: IP-based Rack Access Control System with RFID

    HWg-SH3 is a cabinet IP Access Control System (ACS) with RFID interface. User database is configurable over the Web. Can be used as a stand-alone card access system with web management (Offline) or as a central cabinet Access Control...
  • HWg-Juno 008

    HWg-Juno is I/O device for IP CCTV integration. You can simply connect Digital Inputs & Relay outputs to your current central IP video management system.
  • HWg-Juno 101

    HWg-Juno is I/O device for IP CCTV integration. You can simply connect Digital Inputs & Relay outputs to your current central IP video management system. HWg-Juno support protocols for seamless integration with Genetec Omnicast or...
  • HWg-Juno 1200

    HWg-Juno is I/O device for IP CCTV integration. You can simply connect Digital Inputs & Relay outputs to your current central IP video management system.
  • HWg-Juno 404

    HWg-Juno is I/O device for IP CCTV integration. You can simply connect Digital Inputs & Relay outputs to your current central IP video management system. HWg-Juno support protocols for seamless integration with Genetec Omnicast or...
  • IP WatchDog HWg-WR02a

    Monitors the functionality of a device over IP (PING/WEB) or serial line (RS-232), automatically restarts it upon failure. Web watchdog monitors two independent channels. Industrial version.
  • IP WatchDog Lite

    IP WatchDog Lite monitors function of Ethernet devices. Compared with its full version, the IP WatchDog Lite detects the devices' functionality using only PING. If there is no response within a specified time period, IP WatchDog will RESET...