You are here

Others

  • Water leak detection cable A - 50m for use with HWg-WLD and HWg-WLD Relay.
    Measurment Sensors number Galvanic isolation Units Converter Calibrated Points Consumption
    ResolutionAccuracyTechnologyRange minRange maxUnitMeasure
    1.00
    1
    Resistor
    0
    1
    switch
    Switch
    0mA
  • Water leak detection cable A - 2m for use with HWg-WLD and HWg-WLD Relay.
    Measurment Sensors number Galvanic isolation Units Converter Calibrated Points Consumption
    ResolutionAccuracyTechnologyRange minRange maxUnitMeasure
    1.00
    1
    Resistor
    0
    1
    switch
    Switch
    1 NO None 0mA
  • Water leak detection cable A - 2+50m for use with HWg-WLD and HWg-WLD Relay.
    Measurment Sensors number Galvanic isolation Units Converter Calibrated Points Consumption
    ResolutionAccuracyTechnologyRange minRange maxUnitMeasure
    1.00
    1
    Resistor
    0
    1
    switch
    Switch
    1 NO None 0mA
  • Water leak detection cable A - 2+2m for use with HWg-WLD and HWg-WLD Relay.
    Measurment Sensors number Galvanic isolation Units Converter Calibrated Points Consumption
    ResolutionAccuracyTechnologyRange minRange maxUnitMeasure
    1.00
    1
    Resistor
    0
    1
    switch
    Switch
    1 NO None 0mA
  • Water leak detection cable A - 2+10m for use with HWg-WLD and HWg-WLD Relay.
    Measurment Sensors number Galvanic isolation Units Converter Calibrated Points Consumption
    ResolutionAccuracyTechnologyRange minRange maxUnitMeasure
    1.00
    1
    Resistor
    0
    1
    switch
    Switch
    1 NO None 0mA
  • Water leak detection cable A - 10m for use with HWg-WLD and HWg-WLD Relay.
    Measurment Sensors number Galvanic isolation Units Converter Calibrated Points Consumption
    ResolutionAccuracyTechnologyRange minRange maxUnitMeasure
    1.00
    1
    Resistor
    0
    1
    switch
    Switch
    NO None 0mA
  • Connection RS-485 cable 0.5m. RJ45/4 pins to terminal block (A, B, +, - ). (3 pairs)
    Measurment Sensors number Galvanic isolation Units Converter Calibrated Points Consumption
  • RS-485 cable 0.5m, RJ45/4 pins to connect 4 terminal pins (A, B, +, - ) to connector RJ45 (2 pairs)
    Measurment Sensors number Galvanic isolation Units Converter Calibrated Points Consumption
  • Temperature probe Pt100/A on the cable. Temperature range -50 to 200°C. Silicon covered cable 2m, 4-wires, IP67 probe in in stainless steel tube 50mm
    Measurment Sensors number Galvanic isolation Units Converter Calibrated Points Consumption