You are here

HWg-Ares 12

Ares 12 is an industrial  unit  for  remote  monitoring  and  alarming  over  GSM for locations without LAN access. Includes battery backup. Connect up to 14 external sensors  and  2 dry contact detectors.
Use the SensDesk portal to configure the Ares, send alarms or display graphs.
Ares monitors the readings of connected sensors. When a value reaches the alarm threshold, the device sends an e-mail or a text message (SMS), or dials specified  numbers.
Ares products support FOTA (Firmware Over The Air) for remote firmware updates.

  • Connect up to 14 sensors or a relay output extender unit over the 1-Wire/1Wire UNI bus (RJ11) and up to 2 dry contact inputs for external detectors.
  • Data can be sent in e-mail attachments or downloaded via USB. Display the data using the SensDesk portal, its iOS or Android mobile version, or third-party apps (Nagios etc.).
  • The device can be configured remotely at the “AresConf” tab in the SensDesk portal. Remote firmware upload (FOTA) capability makes Ares devices ideal for large-scale deployments.
  • Alarms are notified by calling and texting up to 5 numbers, e-mailing up to 5 addresses, or via the SensDesk portal.
  • Ares 12 includes an internal battery that provides back-up power for up to 24 hours.
  • The “Tset” start set includes a temperature sensor with a cable that can be extended to up to 60 m
  • Ares 12 can be mounted to a wall or a DIN rail.

Horizontal menu

Online Demo: 
Czech Republic
POINT (15.472962 49.817492)
Output type: 
External module
Output load voltage: 
Output load current: 
Def. impulses out: 
Only for external Outputs
Local condition output: 
Only for external Outputs
Inputs type: 
Dry Contact
Battery backup: 
Time for Backup: 
up to 24 hours